Sheet, strip, wire 10g2 - 10g2 - aisi 1513

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
10g2 1513 10g2 Delivery from the stock, in stock

Evek GmbH offers to buy rolled sheet - sheet and strip, as well as wire, made of manganese-coated low-carbon steel grades 10G2, 10g2 and AISI 1513. The implementation is carried out at economically advantageous prices from the manufacturer. Supplier also provides unconditional compliance with the range and assortment of products, and its delivery to any location that specifies the customer.

Chemical composition

In CIS countries 10G2 steel grade is melted according to GOST 4543 technical standards. The composition of the steel consists of the following chemical elements:

  • C, % - 0,07...0,15 ;
  • Si,% - 0,17...0,37 ;
  • Мn, % - 1,20...1,60.

Among the non-metallic impurities in the steel composition there are phosphorus and sulfur, the percentage content of which may not exceed 0,035%. Steel 10G2 may also have traces of chromium, nickel and copper.

The closest European analogue of the mentioned steel is steel grade 10g2 produced in Poland according to the national standard requirements. It has the same chemical composition. In the USA, according to UNS G15130, AISI 1513 steel is melted with 0.12-0.16% carbon and 1.10-1.40% manganese. In this percent content of silicon is not regulated, and metallurgical impurities - sulfur and phosphorus may not be more than 0,04 and 0,05% respectively.

Buy sheet, strip and wire, which are made from structural manganese steels grades 10G2, 10g2, AISI 1513 offers the company Evek GmbH. Cost-effective producer price is valid. Supplier provides conformity of rolled product assortment supplied and performed prompt delivery of products to the customer.

Properties and application

10G2, 10g2, AISI 1513 steels are produced in wide range of sizes, thickness and diameter. They are used for production of fasteners and other products which require high wear resistance and strength at negative temperatures down to -650...-700 С. Steels are satisfactorily processed by cutting and pressure, can be effectively subjected to carburizing, well welded.

The physical and mechanical characteristics of steels are as follows:

  • Tensile strength, MPa - 430;
  • Ultimate ductility, MPa - 250 MPa;
  • Tensile elongation, % - 22;
  • Relative narrowing of cross-section, % - 45.
  • Elastic modulus, HPa - 190 ... 210.

Buy sheet, strip and wire of manganese structural steel grades 10G2, 10g2, AISI 1513 offers the company Evek GmbH. Supplier provides the sale of rolled products at prices from the manufacturer. Prompt delivery of products to the address specified by the consumer is provided.