Sheet, strip, wire 12KH1MF - 14MoV6-3 - 13hmf
|Mark||Analogue||W. Nr.||Aisi Uns||En||Order|
|12Х1МФ||14MoV63||Delivery from the stock, in stock|
Buy heat-resistant 12KH1MF steel, 14MoV6−3, 13hmf from the company Electrocentury-steel safely and profitably. The price is from the manufacturer. The company guaranteed timely delivery of products in any range
Buy a sheet, tape, wire of low-alloy steels 12KH1MF brands, 14MoV6−3,13 hmf high heat resistance, the company offers Electrocentury-steel. The price corresponds to selling products directly from the manufacturer. Supplier guaranteed timely delivery of goods to the point specified by the buyer.
Composition and properties
In Russia and the CIS steel 12KH1MF is made according to technical requirements GOST 5520−79 and has the following chemical composition:
|Content, %||0,08…0,15||0,17…0,37||0,4…0,7||To 0.3||0,9…1,2||0,25…0,35||0,15…0,3||0.2|
Metallurgical impurities that exist in the steel — phosphorus and sulfur, the number of which is technologically constrained (for sulfur — 0,025%; phosphorus — 0,03%).
The closest foreign analogues are: Germany — steel 1.7715, 14MoV6−3 (steel comes mainly in the form of tubular steel), in Poland — steel 13hmf. Regulatory documents, which are the smelting of these steels are EN 10222−2 (long products) and EN 10216−2 (drawn pipe). The chemical composition meets the following analogs:
|Content, %||0,10…0,15||0,15…0,35||0,4…0,7||0.2||0,3…0,6||0,5…0,7||0,22 0,28…||To 0.025|
The percentage content of metallurgical impurities — sulfur and phosphorus is respectively of 0.015% and 0.025%.
The company Electrocentury-steel offers to buy at factory price heat resisting 12KH1MF low-alloy steel grades, 14MoV6−3, 13hmf. Supplier guarantees performance of its product range for all geometrical parameters of a sheet, ribbon and wire.
After the normalization, the considered steels have such physico-mechanical parameters:
- Limit strength — 490 MPa 580…;
- The limit of plasticity — 305…450 MPa;
- Elongation — 23 to 33%;
- The relative narrowing of the profile — 67…77%;
- Brinell hardness number — 123…177 HB.
These characteristics are maintained up to operating temperatures of 540…5600 C. the Material is not exposed to aging, however, has limited weldability. After carrying out the hot forging of steel acquires a fine-grained structure, and well processed mechanically. The materials used in the manufacture of products, the operation of which is foreseen at elevated temperatures.
Buy rental of high-temperature steel grades 12KH1MF, 14MoV6−3, 13hmf in the mix tape, sheet and wire company offers Electrocentury-steel. Works best for the client price from the manufacturer. Delivery is performed promptly, and in any point specified by the client.