Sheet, strip, wire 15KHM - 13CrMo4-5 - 15hm
|Mark||Analogue||W. Nr.||Aisi Uns||En||Order|
|15ХМ||~F12||13CrMo-44||Delivery from the stock, in stock|
|~15ХМ||1.7335||A182||13CrMo4-5||Delivery from the stock, in stock|
Buy a sheet, tape, wire from heat-resistant alloyed steel grades 15KHM and 13CrMo4−5 the company offers Electrocentury-steel. Operates a cost-effective price from the manufacturer. The supplier guarantees the fulfilment of the necessary product range of hire with the delivery of products to the address specified by the customer.
Composition and properties
High-temperature structural steel 15KHM has a high content of chromium and molybdenum. It is produced in Russia and the CIS countries on technical requirements GOST 4543, and has the following chemical composition:
|Availability in steel, %||0,11 0,18…||0,17…0,37||0,40…0,70||0,80 1,10…||Of 0.40 to 0.55|
As smelting impurities in this steel are also sulfur and phosphorus, whose content in the material can not be higher than 0,035%. In Europe the closest analogue of the considered material is the steel grade 13CrMo4−5, which is produced in accordance with European standards EN10216−2. The following is the chemical composition of the steel:
|Availability in steel, %||0,08 0,19…||Not above 0,35||0,4…1,0||0,70 1,15…||0,4…0,6||Does not exceed 0.3||Not above 0.04|
In the manufacture of this steel in the final product allowed the residual content of copper (not exceeding 0,25%).
To purchase rental high-temperature structural alloy steel 15KHM and 13CrMo4−5 the company offers Electrocentury-steel. Supply of sheet, strip and wire made at competitive prices from the manufacturer. The supplier guarantees the appropriate quality of hire.
High-temperature structural steel 15KHM and 13CrMo4−5 can be subjected to various heat treatment vidmem. After completing the annealing, the materials have the following mechanical characteristics:
- Tensile strength, MPa — 460;
- Yield strength, MPa — 280;
- Elongation % — 21;
- The relative narrowing of the cross section % — 55;
- Impact strength, kJ/m2 to 1200.
Sheet and bulk rolled steel 15KHM and 13CrMo4−5 is used in the manufacture of piping and steam lines which are operated at high temperatures and pressures. From forgings, cast down by hot stamping, to produce the elements of valves, and fasteners, which is loaded with higher pressures. High-temperature performance of parts made from these grades of steel, do not decrease until the temperature of 450…5000 C.
Buy a sheet, tape, wire heat resistant medium alloy steel of the type 15KHM and 13CrMo4−5 the company offers Electrocentury-steel. Supplier of guaranteed price from manufacturer products. The company completes the product range of supplies, with delivery of products directly to the consumer.