Sheet, strip, wire 25Kh2M1F - 24CrMoV5-5 - 26h2mf

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
25X2M1F EI723 24CrMoV5-5 Delivery from the stock, in stock

Evek GmbH offers to buy rolled steel 25X1MF, as well as its foreign counterparts at the manufacturer's price. The company guarantees timely delivery of purchased products

Buy sheet, wire, tape of high-temperature resistant relaxation-resistant steel 25X1MF, as well as foreign counterparts of this material - steels 21CrMoV5-7 and 21hmf, offers the company Evek GmbH. The prices are from product manufacturer. Supplier provides delivery of goods to any address specified by the customer.

Chemical composition

Alloyed structural steel 25Х1МФ belongs to the group of heat-resistant relaxation-resistant steel. In CIS countries it is smelted according to GOST 20072 specifications. In case of individual production the steel composition is regulated by manufacturer's specifications, the steel name is ЭИ10.

The chemical composition of steel 25Kh1MF must comply with the specified in the table:

Component C Mn Si Ni Cr Mo V Cu
Content, % 0,22...0,29 0,4...0,7 0,17...0,37 Up to 0.3 1,5...1,8 0,25...0,35 0,15...0,30 Up to 0.2

In the composition of steel as metallurgical impurities are also phosphorus (in an amount not exceeding 0.03%) and sulfur (in an amount not exceeding 0.03%). The closest foreign analogues of steel 25Х1МФ are: in Germany 21CrMoV5-7 (produced according to standards EN and DIN), in Poland - steel 21hmf (produced according to Polish standard PN). Chemical composition of analogues is given in the table:

Component C Mn Si Ni Cr Mo V AL
Content, % 0,17...0,25 0,4...0,8 Up to 0.4 Up to 0.6 1,2...1,5 0,65...0,8 0,25...0,35 Up to 0.03

The percentage of phosphorus and sulfur must not exceed 0.03%.

Buy sheet, strip, wire of medium-alloy structural steel grades 25H1MF, 21CrMoV5-7 and 21hmf, with high heat resistance and relaxation resistance offers the company Evek GmbH. Cost-effective price from the manufacturer. The supplier guarantees timely delivery of rolled metal products to the location specified by the customer.

Properties and application

Steels of 25Х1МФ, 21CrMoV5-7 and 21hmf grades are referred to the group of heat-resistant, relaxation-resistant pearlitic steels and used for manufacture of plane parts operated at elevated to 500-5100 СTypical parts made of the above steel grades are flat springs, parts of measuring equipment for power and steam-power plants, as well as temperature-resistant fasteners. The steels can be quenched, annealed and tempered without embrittlement. Sensitive to the formation of flocs, weldability of steels is limited.

The mechanical characteristics of the steels in question after hardening correspond to the following values:

  • Tensile strength - 880 MPa;
  • Ultimate ductility - 735 MPa;
  • Relative elongation - 14%;
  • Relative narrowing of the cross section - 60%;
  • Impact toughness - not less than 590 kJ/m2.
Buy sheet, wire, ribbon of heat-resistant relaxation-resistant steel grades 25X1MF, 21CrMoV5-7 and 21hmf offers the company Evek GmbH. The manufacturer price of these products is valid. Supplier ensures timely delivery of purchased products to the point specified by the customer, as well as compliance with the assortment of rolled products.