Sheet, strip, wire 30hgsn2a - 30hgsna

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
30HGSN2A Delivery from the stock, in stock

Buy sheet, strip, wire, which are made of structural alloy steel grades 30ХГСН2А and 30 hgsna, offers the company Evek GmbH. There is a cost-effective price from the manufacturer. Supplier provides adherence to the product range, svrevremennye transport of products to the address specified by the customer.

Chemical composition

Structural steel grades 30ХГСН2А and 30 hgsna have similar composition, characterized by high percentage of silicon, manganese, chromium and nickel. In CIS countries 30KhGSN2A steel is produced in accordance with GOST 4543, 30Khgsna steel is produced by Polish metallurgical companies:

Component C Si Mn Cr Ni
Percentage content in steel 0,27...0,34 0,90...1,20 1,00...1,30 0,90...1,20 1.40...1,80

The steels in question contain such non-metallic impurities as sulfur and phosphorus. The Russian standard limits their content to 0.025%, while 30 hgsna steels are allowed to have up to 0.03% phosphorus.

Evek GmbH offers to buy sheets, strips and wires made of 30ХГСН2А and 30 hgsna medium-carbon alloy steels at advantageous prices from the manufacturer. Supplier guarantees unconditional compliance with the range of products supplied, provides its timely delivery to the address specified by the customer.

Properties and application

Structural chromium, nickel, manganese and silicon alloyed steels 30KhGSN2A and 30Khgsna are characterized by high strength properties, and therefore widely used for the production of parts with increased strength. Because of the large amount of nickel present, the steels are characterized by improved machinability - both by cutting and by pressure. These steels can be subjected to various heat treatments.

After quenching and tempering, the mechanical parameters of 30KhGSN2A and 30KhGSna steels are as follows:

  • Tensile strength - 1650 MPa;
  • yield strength - 1400 MPa;
  • Relative elongation - 9%;
  • Relative narrowing of the cross section - 45%;
  • Impact toughness - 600 kJ/m2.

Buy sheet, strip, wire of structural alloy steels grades 30ХГСН2А and 30 hgsna at the best price from the manufacturer offers the company Evek GmbH. The supplier provides prompt delivery of products, guarantees the performance of the assortment of supply of sheet metal and wire in the required volumes.