Sheet, strip, wire 30хн3а - 31nicr14 - 1.5755

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
30ХН3А 1.5755 31NiCr14 Delivery from the stock, in stock

Want to buy sheets, strips, wires of structural alloy steel grades 30KhN3A, 31NiCr14, 1.5755? Evek GmbH offers rolled products of these steels at the manufacturer's price with delivery to any location specified by the customer

Evek GmbH offers to buy sheets, strips, wires made of structural alloy steel 30XH3A and 31NiCr14 (1.5755). Supplier guarantees favorable price from the manufacturer, provides timely delivery of products to any location specified by the customer.

Chemical composition

30ХН3А steel grade is one of chromium-nickel constructional steels produced in CIS countries in accordance with GOST 4543 technical requirements. The chemical composition of the steel includes:

Chemical element С Si Mn Cr Ni
Presence in steel, % 0,27...0,33 0,17...0,37 0,30...0,60 0,60...0,90 2,75...3,15

In addition, in the composition of this steel there are nonmetallic impurities - sulfur and phosphorus. Their percentage in the finished product should not exceed 0.03%.

Of the nearest European analogues of this steel, steel grade 31NiCr14 (1.5755) should be mentioned. This steel is melted according to the standards AISI A518 and DIN C50. The chemical composition of steel 31NiCr14 (1.5755) is as follows:

Chemical element C Si Mn Cr Ni
Presence in steel, % Not more than 0.31 Not more than 0.25 Not more than 0.60 Not more than 0.75 Not more than 3.50

Buy a bargain price from the manufacturer of the pipe, rod, a circle, which are made of alloy constructional steel 30XHN3A and 31NiSr14 (1.5755), with high percentage of nickel and chromium offers the company Evek GmbH. The supplier guarantees strict adherence to the assortment of rolled steel products supplied, and ensures their timely transportation to the location specified by the customer.

Properties and application

Structural alloyed steel of the considered grades is widely used for manufacturing of the enclosing structures, tanks of vessels working under increased pressure, as well as for cold and hot forging of high-strength fasteners. Steels 30KhN3A and 31NiCr14 (1.5755) are successfully amenable to hardening heat treatment and hot volume forging, machinability is reduced.

After quenching and subsequent tempering these grades of steel have these physical and mechanical properties:

  • Tensile strength, MPa - 1000;
  • Limit of plasticity - 800 MPa;
  • Relative elongation - 9%;
  • Relative narrowing of the cross section - 50%;
  • Impact viscosity - 800 kJ/m2;
  • Young's modulus - 210 GPa.

Evek GmbH offers to buy sheets, strips and wires produced from medium-carbon structural steel of 30XH3A, 31NiCr14 (1.5755) grades, alloyed with chrome and nickel at producer price. The supplier ensures compliance with the entire range of rolled products supplied, provides metal delivery to any point specified by the customer.