Sheet, strip, wire 35hgsa - 35hgsa

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
35HGSA Delivery from the stock, in stock

Evek GmbH offers to buy sheet metal products - sheets, strips and wires made of 35ХГСА and 35hgsa alloy construction steel at the manufacturer's price. The supplier ensures compliance with the assortment range of supply of rolled products, guarantees prompt transportation of purchased products to the point marked by the customer.

Chemical composition

Steel grade 35KhGSA is an alloyed structural steel of improved quality, and with increased percentage of silicon, manganese and chromium. In CIS countries it is melted according to GOST 4543 standards. The composition of the steel is as follows:

  • Carbon - 0.32 ... 0.39%;
  • Silicon - 1.10...1.40%;
  • Manganese - 0.80 ... 1.10%;
  • Chrome - 1.10...1.40%.

GOST allows the presence of non-metallic impurities in steel - sulfur and phosphorus. Their percentage cannot exceed 0.03% for each of the elements.

Polish metallurgical companies produce steel 35hgsa which is similar in its composition. According to the norms of the national standard PN, in the composition of this steel may be present in small quantities (less than 0.05%) vanadium, copper and tungsten.

The company Evek GmbH offers to buy sheets, strips and wires of structural alloy steel 35ХГСА or 35hgsa at economical prices from the manufacturer. The supplier guarantees strict compliance with the assortment of supply of profiles. Product delivery is made to the address specified by the customer.

Properties and application

Structural medium-carbon steel grades 35ХГГСА and 35хgsa with additional alloying with silicon, manganese and chrome are used for plate production and fasteners with increased strength and wear resistance. The steels lend themselves well to hardening heat treatments but have unsatisfactory weldability.

As a result of hardening and subsequent tempering, the steels in question have the following mechanical properties:

  • Tensile strength - 1650 MPa;
  • yield strength - 1300 MPa;
  • Relative elongation - 9%;
  • Relative narrowing of the cross section - 40%;
  • Impact toughness - 400 kJ/m2.

Company Evek GmbH offers to buy sheets, strips and wires of structural alloy steels of 35ХГСА and 35hgsa grades at manufacturer's favourable price. The supplier guarantees the performance of the assortment range of rolled products supply, its prompt transportation to the customer is ensured.