Sheet, strip, wire 38хн3мфа - 35nicrmov12-5 - 1.6959

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
38HN3MFA 1.6959 35nicrmov12-5 Delivery from the stock, in stock

Evek GmbH offers to buy sheets, strips, wires made of high-alloyed medium-carbon steel 38ХН3МФА and 35NiCrMoV12-5 (1.6959). The products are sold at economically advantageous producer price. Supplier provides strict compliance with the range of supplied steel products, fast transportation of products to the customer is guaranteed.

Chemical composition

38KhN3MFA structural steel belongs to the group of high quality chromium-nickel-molybdenum-vanadium steels. In CIS countries this steel is melted according to GOST 4543 standards. The composition of 38KhN3MFA steel includes:

Component C Si Мn Cr Ni Mo V
Percentage content in steel 0,38...0,40 0,17...0,37 0,25...0,50 1,20...1,50 3,00...3,50 0,35...0,45 0,10...0,18

The presence of metallurgical impurities - phosphorus and sulfur is limited to 0,025%.

Of the closest foreign analogues of steel should specify steel grade 35NiCrMoV12-5 (1.6959). This steel is produced in Europe according to technical requirements of WL standard. It has the following chemical composition:

Component C Si Mn Cr Ni Mo V
Percentage content in steel 0,30...0,40 0,15...0,35 0,40...0,70 1,00...1,40 2,50...3,50 0,35...0,60 0,08...0,20

Buy a cost-effective producer price sheet (sheet, strip), and wire, which are made of structural alloy steels grades 38HN3MFA and 35NiCrMoV12-5 (1.6959) offers the company Evek GmbH. Supplier guarantees full conformity of the product range supplied and provides prompt delivery to the address specified by the customer.

Properties and application

High-alloy constructional steels 38XHN3MFA and 35NiCrMoV12-5 (1.6959) are used in production of super heavy-duty steel parts, which are operated at the temperatures up to4000 C. Such products include flat parts for power steam power plants, storage tanks for liquids at the above temperatures, heat-resistant fasteners , etc.

The basic physical and mechanical parameters of the steels under consideration after heat treatment: hardening and tempering:

  • Tensile strength - 1250...1300 MPa;
  • yield strength - 1070...1200 MPa;
  • Relative elongation - 13...16%;
  • Relative narrowing of the cross-sectional area - 35%;
  • Impact toughness - 400 ... 450 kJ/m2.

Buy a bargain price from the manufacturer of sheet, strip, wire of structural alloy steels grades 38HN3MFA and 35NiCrMoV12-5 (1.6959) offers the company Evek GmbH. The supplier provides fulfillment of the product range, its timely delivery to the customer is guaranteed.