Sheet, strip, wire 45g2 - 45g2 - aisi 1144

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
45G2 1.3561 4Cr2 Delivery from the stock, in stock
45G2 1.3561 46Cr2 Delivery from the stock, in stock
45G2 1.7006 5045 45Cr2 Delivery from the stock, in stock

Would you like to buy sheets, strips and wires of medium-carbon construction steel grades 45G2, 35S20, AISI 1144? Evek GmbH offers to buy rolled products of these steels at economical producer prices. Products are delivered to the address indicated by the customer.

The company Evek GmbH offers to buy sheets and wire of medium-carbon structural steel 45G2, 35S20, AISI 1144 with high manganese content at manufacturer's economical prices. Suppliers are provided with strict adherence to rolling assortment, its timely delivery to the customer is guaranteed.

Chemical composition

Structural medium-carbon steel 45G2 grade with increased manganese content in the CIS is produced according to the technical requirements and norms of GOST 4543. The steel composition contains:

  • Carbon - 0.41...0.49%;
  • Silicon 0.17...0.37%;
  • Manganese - 1,40 ... 1.80%.

Also in the steel are nonmetallic impurities - sulfur and phosphorus. Their percentage should not exceed 0.04%.

The best known foreign counterparts of steel 45G2 are steel 35S20 (its production is carried out by steel companies in Europe) and steel AISI 1144 (produced in accordance with North American standard ASME 1045). These analogues do not differ in their chemical composition from steel 45G2 (with the possible exception of traces of nickel, copper, chromium and aluminum).

Buy rolled sheets (sheet, strip) and wire of steel grades 45G2, 35S20, AISI 1144, containing a high percentage of manganese, offers the company Evek GmbH. Realization is made at the price of the producer. Supplier provides prompt delivery of rolled steel to the address specified by the consumer, as well as strict adherence to the range of products supplied.

Properties and application

Medium-carbon structural steel of 45G2, 35S20, AISI 1144 grades is widely used for fabrication of high-strength sheet metal parts and fasteners. Among such items are flat levers, brackets, large tanks operating under high pressure, as well as large flywheels, gears, connecting rods, etc. The steels in question have reduced plastic properties and tend to flake when heat-treated. Weldability is possible only under a layer of flux.

Initial physical and mechanical characteristics of steels :

  • Tensile strength, MPa - 745;
  • yield strength, MPa - 635;
  • Modulus of elasticity, GPa - 190;
  • Relative elongation, % - 10;
  • Relative narrowing, % - 30;
  • Brinell hardness, HB - 228.

Buy sheet, strip, wire of structural steel grades 45G2, 35S20, AISI 1144, with high manganese content, offers the company Evek GmbH. Supplier sells products at manufacturer's price. Strict adherence to the range of supply is ensured, product delivery to any location specified by the customer is guaranteed.