Sheet, strip, wire as35g2 - 36smnpb14 - 1.0765

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
ac35g2 1.0765 36smnpb14 Delivery from the stock, in stock

Evek GmbH offers to buy sheets, strips and wires made of constructional steels with increased machinability of AC35G2 and 36SMnPb14 (1.0765) grades at an economical price from the manufacturer. The supplier guarantees the performance of the product range, as well as timely delivery to the address specified by the customer.

Chemical composition

Medium-carbon automotive steel AS35G2 is produced by the domestic metallurgical industry in accordance with the technical requirements of GOST 1414-75. The basic condition of delivery is considered calibrated steel with special surface finish according to GOST 14955. Composition of steel corresponds to the given in the table:

Component C Si Mn Cr Ni Cu Pb S
Presence in steel, % 0,32...0,39 0,17...0,37 1,35...1,65 Not more than 0.25 Not higher than 0.25 Not higher than 0,25 0,15...0,30 0,08...0,13

As a metallurgical impurity, AS35G2 steel contains phosphorus, the amount of which cannot exceed 0.04%.

The nearest steel analogue is European steel 36SMnPb14 (1.0765). The chemical composition of the steel meets the technical norms of European standards EN 10277 and EN 10087:

Component C Si Mn S P Pb
Presence in steel, % 0,32...0,39 Up to 0,40 1,30...1,70 0,10...0,18 Up to 0.04 0,17...0,35

Company Evek GmbH offers to buy sheet, strip, wire, which are made from structural medium-carbon automotive steel of AS35G2 and 36SMnPb14 (1.0765) grades. rolled products are sold at producer price. The supplier guarantees the strict fulfillment of the product range and timely delivery to the customer.

Properties and application

Steels of the reviewed grades are widely used in the automotive industry in the manufacture of various parts by methods of machining sheet metal and bulk. On automatic multi-turn lathes rollers of oil pump units, various fasteners and other parts requiring improved machinability are produced from these steels.

The main physical and mechanical properties of rolled products of these grades after improvement are as follows:

  • Tensile strength - 750 MPa;
  • yield strength - 590 MPa;
  • Relative elongation - 14%;
  • Brinell hardness - after annealing not more than 220 NV, after calibration - not more than 280 NV.

Company Evek GmbH offers to buy sheet, strip, wire, which are made of medium-carbon constructional steel AC35G2 and 36SMnPb14 (1.0765). Economically advantageous producer price is valid. Supplier guarantees strict adherence to the assortment and dimensions of rolled products sold, ensures its timely delivery to the location specified by the customer.