Sheet, strip 5XGM - 40CrMnMo7 - 1.2311 - aisi P20

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
5HGM 1.2311 P20 40CrMnMo7 Delivery from the stock, in stock

Evek GmbH offers to buy at the manufacturer's best price rolled sheet - sheet, strips, which are obtained from tool stamped steel grades 5KhGM, 40CrMnMo7 (1.2311) and AISI P20. Supplier guarantees adherence to the assortment and delivery profiles of rolled products, provides timely transportation of products to the address specified by the customer.

Chemical composition

5ХГМ steel grade intended for hot plastic deformation tools in CIS countries is produced in compliance with GOST 5950 technical standards. The composition of steel is given in the table:

Element C Si Mn Cr Mo
Content in steel, % 0,50...0,60 0,25...0,60 1,20...1,60 0,60...0,90 0,15...0,30

GOST 5950 limits the content of metallurgical impurities in this steel - phosphorus and sulfur. Their content for each of the elements should not exceed 0,025%.

The nearest foreign counterparts of 5CrMnMo7 steel grade are 40CrMnMo7 (1.2311) in Europe, produced in accordance with DIN 17350 standard, and AISI P20 in the USA, melted in accordance with ASTM A569 and ASTM A366 standards. The composition of analogues slightly differs from 5XGM grade. The chemical composition of 40CrMnMo7 (1.2311) is given for comparison:

Element C Si Mn Cr Mo
Content in steel, % 0,34...0,45 0,20...0,40 1,30...1,60 1,80...2,10 0,15...0,25

The content of phosphorus and sulphur in analogues should not be higher than 0.03%.

Company Evek GmbH realizes at advantageous price from the manufacturer sheets and strips that are made of tool alloy steels 5ХГМ, 40CrMnMo7 (1.2311) and AISI P20. Supplier guarantees compliance with the range of supply of sheet metal, provides its timely delivery to the customer.

Properties and application

The steels under consideration belong to the group of stamping steels with moderate heat capacity and toughness indicators. They can be used for making forging and die forging hammers which work under cyclic shock loading, but with relatively low temperatures of heating of working gravure of die tooling (not more than 520...5500 С). Steels 5KhGM, 40CrMnMo7 (1.2311) and AISI P20 are characterized by sufficient toughness and hardenability with moderate heat resistance, which suggests their use in the parts of molds for die casting of plastic non-ferrous metals and alloys.

The main physical and mechanical characteristics of steels after quenching and tempering at200 C are:

  • Tensile strength - 1540 MPa;
  • Yield strength - 1300 MPa;
  • Relative elongation - 9%;
  • Tensile strength - 34 kJ/m2;
  • Hardness - 43...45 HRC;

Company Evek GmbH offers to buy at favorable price from the manufacturer sheet and strip, made of tool alloy steel grades 5ХГМ, 40CrMnMo7 (1.2311) and AISI P20. Supplier ensures compliance with the assortment and profile of rolled products supply, guaranteed prompt transportation of products to the point specified by the customer.