Sheet, strip 5hnm - 54NiCrMoV6 -1.2711

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
5ХНМ 1.2711 54NiCrMoV6 Delivery from the stock, in stock

The company Evek GmbH offers to buy rolled sheets - sheets and strips, which are made of tool alloy steel grades 5KHNM and 54NiCrMoV-6 (1.2711). All products are sold at manufacturer's price. The supplier provides prompt delivery of rolled products to the address specified by the customer.

Chemical composition

Stamp steel of 5XHNM grade is used for the manufacture of hot deformed dies. It belongs to tool steels with moderate heat resistance and increased toughness. Production of this steel in CIS countries is carried out according to GOST 5950 standards. Chemical composition of this steel is given in table:

Component C Si Mn Cr Mo Ni
Content in steel, % 0,50...0,60 0,15...0,35 0,50...0,80 0,50...0,80 0,15...0,30 1,40...1,80

In the steel 5ChNM allowed metallurgical impurities - phosphorus and sulfur. Their presence in the finished product may not exceed 0.025%.

The closest foreign analogue of 5KhNM steel is 54NiCrMoV-6 (1.2711) alloy die steel. It is melted according to DIN specifications, and includes:

Component C Si Mn Cr Mo Ni V
Content in steel, % 0,50...0,60 0,15...0,35 0,50...0,80 0,60...0,80 0,25...0,35 1,50...1,80 0,08...0,12

This steel can have a maximum sulfur content of 0.035% according to DIN standards.

Company Evek GmbH sells at economically advantageous producer price sheets and strips made of tool alloy steels 5XHM and 54NiCrMoV-6 (1.2711). Supplier guarantees strict compliance with dimensions and assortment of profiles of sheet metal, provides its timely delivery to the customer.

Properties and application

Steels of 5XHNM and 54NiCrMoV-6 (1.2711) grades are noted for their increased impact toughness and hardenability along with moderate (up to 520...5500 С) heat resistance. They are recommended for the manufacture of one-piece dies, as well as inserts of hammers and CMP of low forces and strain energies. The steels under consideration are also used for manufacturing of tools of hot forging machines designed for production of articles from highplastic steels, nonferrous metals and alloys, as well as tools for cutting profiles in hot state.

Physical and mechanical characteristics:

  • Tensile strength - 900 MPa;
  • Yield strength - 600 MPa;
  • Relative elongation - 12%;
  • Young's modulus - 434 MPa;
  • Brinell hardness after softening annealing - 244 NV;
  • Hardness after quenching - 40...47 HRC;
  • Thermomechanical fatigue - up to 650...700 cycles.

Buy at producer price sheet and strip of alloy tool steels grades 5XHM, 54NiCrMoV-6 (1.2711) offers the company Evek GmbH. The supplier ensures compliance with the nomenclature of the supplied sections, timely delivery of rolled products to the customer is guaranteed.