Sheet, strip X6VF - X100CrMoV5-1 - 1.2363

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
X6VF 1.2363 X100CrMoV5-1 Delivery from the stock, in stock

Evek GmbH offers to buy sheets or strips of X6VF or X100CrMoV5-1 (1.2363) tool-alloy steels at economical prices from the manufacturer. The supplier ensures compliance with the dimensional range of rolled sections, its prompt transportation to the location specified by the customer is guaranteed.

Chemical composition

X6VF steel belongs to the group of stamping steels, which are designed for use in technological processes of cold plastic deformation of metals and alloys. In the CIS countries, the steel in question is produced in accordance with the requirements of GOST 5950, and is characterized by the following chemical composition:

Component C Si Component Si, Mn Cr W V
Percentage content in steel 1,05...1,15 0,15...0,35 0,15...0,40 5,50...6,50 1,10...1,50 0,50...0,80

In the composition of steel X6VF not more than 0,03% of non-metallic impurities - phosphorus and sulfur.

Abroad the closest analogue of this steel is steelX100CrMoV5-1 (1.2363). It is melted in Europe, in accordance with DIN 17350. In North America, the closest equivalent is AISI A2 tool steel. The composition of X100CrMoV5-1 (1.2363) is shown in the following table:

Component C Si Mn Cr W V
Percentage steel content Not more than 1.0 Not more than 0.25 Not more than 0.60 Not more than 5.15 Trace Not more than 0.20

Limitations on sulfur and phosphorus - the same as for the steel X6VF.

Buy at best price from the manufacturer of sheet or strip of tool alloyed steel X6VF, X100CrMoV5-1 (1.2363) offers the company Evek GmbH. Supplier guarantees compliance with the range of supply of sheet metal profiles, ensures its timely delivery to the location specified by the customer.

Properties and application

X6VF, X100CrMoV5-1 (1.2363) steels are characterized by operational values of strength, toughness and wear resistance, which allow their successful use in the manufacture of working parts of punching and punching dies of cold sheet forming. Thread rolling tool, punches and dies of drawing and forming dies, bandage bushings of press tools are also made of these steels, specific loads on which do not exceed 1700 MPa.

The main physical and mechanical characteristics of the X6VF, X100CrMoV5-1 (1.2363) steels after hardening and tempering are:

  • Ultimate strength - 2000 MPa;
  • Tensile strength - 40 kJ/m2;
  • Hardness - 58 ... 60 HRC;

Buy a bargain price from the manufacturer, sheet and strip, made of tool alloy steels X6VF or X100CrMoV5-1 (1.2363) offers the company Evek GmbH. The supplier ensures compliance with the assortment of sold sheets, guarantees its timely delivery to the point defined by the customer.