Sheet, strip ShKh15 - 100Cr6 - 1.3505 - aisi 52100

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
ShKh15F EI760 1.3505 52100 100Cr6 Delivery from the stock, in stock

Evek GmbH offers to buy sheets and strips of high-carbon steel grades SchX15, 100Cr6, 1/3505, AISI 52100 for bearing production. Supplier provides cost-effective price of products from its manufacturer. You can buy sheet and strip of these steels with the condition of prompt delivery to any point indicated by the consumer.

Chemical composition

A distinctive feature of this class of steel is an increased content of carbon and chromium - elements that increase the hardness and wear resistance of parts operating in conditions of elevated temperatures and sliding speeds. ShKh15 steel is produced according to GOST 801 standards and has the following composition:

Component C Si Mn Cr Ni Cu
Content in steel, % 0,95...1,05 0,17...0,37 0,20...0,40 1,30...1,65 Not more than 0.30 Not more than 0.30

As unavoidable metallurgical impurities, this steel also contains sulfur (at no more than 0.02%) and phosphorus (at no more than 0.027%).

This steel's foreign counterparts are grades 100Cr6 and 1.3505 in Europe, and AISI 52100 in the USA and North America. The composition of foreign counterparts corresponds to the following data:

Component C Si Mn Cr Mo Cu Al
Content in steel, % 0,93...1,05 0,15...0,35 0,25...0,45 1,35...1,60 0.10 max. Maximum 0.30 Not more than 0.30

The analogue steels have a limited percentage of impurities - sulfur and phosphorus. The upper limit of these elements must not exceed 0.025...0.03%. In steel 100Cr6, 1.3505 and AISI 52100 may be present oxygen, the amount of which can not be higher than 0.0015%.

Buy sheet metal rolled steels for bearing production (100Cr6, 1.3505, AISI 52100) offers the company Evek GmbH. The price from the manufacturer is valid. Supplier provides compliance with the range of ordered products, as well as product delivery to the point indicated by the customer.

Properties and application

Steels ShKh15, 100Cr6, 1.3505, AISI 52100 are manufactured in accordance with the requirements of international standards DIN 17350 and EN ISO 683-17. In annealed condition, these steels have the following physical and mechanical properties:

  • Tensile strength - 590...730 MPa;
  • Plasticity limit - 390...510 MPa;
  • Tensile strain - 15...20%;
  • Relative narrowing - 25...15%;
  • Brinell hardness - 179...207 NV.

These values are determined by heat treatment modes, in particular by cooling rate and heating temperature. Rolled sheets of ShKh15, 100Cr6, 1.3505, AISI 52100 steels are prone to flaking and are characterized by tempering brittleness. At the same time these steels are well processed by grinding.

Evek GmbH offers to buy sheets and strips of bearing steel grades SchX15, 100Cr6, 1.3505, AISI 52100 at producer price. Supplier provides strict adherence to delivery dates and delivery of products to the point set by the customer.