Nichrome x20n80 wire - 2.4869 - Ni80Cr20

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
Х20Н80 EHN80 2.4869 N06003 NiCr80-20 Delivery from the stock, in stock
Х20Н80-Н EHN80 2.4869 N06003 NiCr80-20 Delivery from the stock, in stock
Х20Н80Н EHN80 2.4869 N06003 NiCr80-20 Delivery from the stock, in stock

Relevance

Nichrome wire for heating elements of household or industrial electric furnaces has the following marking: Х15Н60, Х20Н80, ХН20ЮС, ХН70Ю. It is designed for operating temperature of 1100 - 1250 °C. Such wire is especially relevant for ceramic firing furnaces. It is used as a heat-resistant string for thermal cutting, cutting, soldering of polyethylene bags, it is also in demand for cutting of plexiglass. Nichrome wire is produced with and without a special coating.

Standard section of nichrome wire:

- For modeling and cutting 0,1 - 0,5 mm

- For molded cutting of 1 - 2 mm.

Advantages

Nichrome has a successful combination of heat resistance and high electrical resistance. The minimum coefficient of thermal expansion allows the wire not to sag at significant temperatures. The surface oxides of chromium and nickel give the alloy excellent corrosion resistance which makes it suitable for use in aggressive environments. Plasticity allows the finest wire and strip to be rolled in a cold condition. Heat resistance helps nichrome wire withstand mechanical stresses without deformation or fracture.

Cable

Nichrome cable has found use in heating roofs and gutters. Cr15N60, Cr20N80, CrN20YUS, CrN70Yu threads are woven into a zonal resistive cable, which is laid along the gutter line. In small frosts (up to minus ten degrees) it melts the snow. Water flows down the gutter without forming overhanging icicles.

Supply

All products are certified. The technical documentation includes data on the chemical composition, the limiting percentage of impurities; mechanical properties of the products. With us you can buy in bulk a variety of semi-finished products for large-scale production. We also offer good conditions for retail buyers. You will be satisfied with the level of service and responsiveness of service.

Buy at a competitive price

The website of Evek GmbH reflects the most up-to-date information on the purchase of nickel alloys to date. Experienced managers who are always in touch are ready to provide highly qualified advice on any current issues. We sell semi-finished products of rare and non-ferrous at a competitive price. Products are manufactured on the most modern equipment and meet the requirements of international quality standards. Regular customers are offered a system of discount discounts.