Annealed copper pipe

Production

According to the method of production copper tubes are distinguished between drawn and pressed, by the method of processing - annealed (more plastic, supplied in coils) and unbaked. Percentage composition of copper tubes is normalized according to GOST 859-2001 and manufactured according to GOST 617-2006. Usually copper grade with minimum content of impurities is used: M1 or M2.

Copper pipes are graded as follows

  • By form: round, square and rectangular.
  • By the method of production: drawn, pressed - G, cold-rolled - D.
  • According to precision of manufacture: N - normal precision, P - high precision.
  • According to plasticity of material: hard - T; semi-hard - P; soft - M; soft increased plasticity - L; semi-hard increased strength - R; hard increased strength - F.
  • Lengths: off-numbered length - ND, multiples of measured - KD, in coils - BT.

Supplies

Copper tubes with diameter up to 10 mm are supplied (in annealed state) in coils. The ends of tubes are closed to prevent ingress of dirt, dust, sand, water. Each batch of pipes is packed in hermetically sealed polyethylene packaging. It is stored indoors or under a roof.

Range

The most popular annealed tubes with a diameter of less than 10 mm are 3/8″ (9.53x0.81mm) and ¼″ (6.35x0.76mm). They are most often used in refrigerators, air conditioning and climate control systems. These copper pipes are a guarantee of high quality equipment and reliability. Together with them, fittings and other consumable accessories that allow for maximum ease of installation and increase the efficiency of the systems.

Advantages

Annealed copper pipe is without any alternative in the assembly of air conditioners and any cooling equipment. First of all, it is connected with the fact that it has high plasticity, which allows giving it any shape, and corrosion resistance allows using any types of refrigerants. Such pipe is extremely easy to install and has a very long life - dozens of years. Buy at a bargain price

Buy on bargain price

Evek GmbH has a wide range of non-ferrous alloy tubes at the best price. It is formed taking into account the rates on the London Non-ferrous Exchange and depends on the technological features of production without the inclusion of additional costs. Technical documentation includes data on the chemical composition, the limiting percentage of impurities; mechanical properties of products. With us you can buy in bulk the most various products for large-scale productions. We also offer good conditions for retail buyers. You will be satisfied with the level of service and high quality products. Our offices are located. We offer optimal conditions for ordering. On our site you will find all the necessary information about the goods, you can download the catalog of products, view the price list. All products are ultrasonically tested for defects. Our online consultant is always ready to answer your questions. You can find us on the Internet at the address. Implementation of orders - in the shortest possible time. Wholesalers receive preferential discounts.