Wire, circle, rod dural d16 - 2024

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
D16 1160 3.1355 AA2024 AlCuMg2 Delivery from the stock, in stock

Supplier

We offer to buy duralumin circles, bars, wires D16 at an affordable price from specialized warehouses of the supplier Evek GmbH with delivery in any city. You can order products with non-standard parameters. We have the best price-quality ratio for the entire range of products. Supplier Evek GmbH offers to buy duralumin circles, bars, wires D16 or rolls of any similar mark, the price - optimal in this segment of rolled products.

Technical characteristics

Grade: wrought aluminum alloy, aluminum content of 90.9 - 94.7%. Hardness after quenching and aging HB 10 -1 = 105 MPa. Alloy annealed HB 10 -1 = 42 MPa. The alloy is available in the form of sections and sheets, forging material, tubes.

Percentage composition, GOST 4784-97

Al Fe Si Mn Cr Ti Al Cu Mg Ti+Zr Zn Impurities
base ≤0.5 ≤0.5 0.3 - 0.9 ≤0.1 ≤0.15 90.9 - 94.7 3.8 - 4.9 1.2 - 1.8 ≤0.2 ≤0.25 ≤0.15

Rolled steel is used under moderate loads for load-bearing elements of aircraft structures, car bodies, for parts operating at temperatures up to -230°C.

Mechanical properties (temperature of 20°C)

Range Size GOST s in sT d5 Heat treatment
- mm - MPa MPa % -
Rods 21488-97 245 120 12
Rods Ø 8 - 300 21488-97 390-410 275-295 8-10 Hardening and aging
High-strength rods 51834-2001 450-470 325-345 8-10 Hardening and aging
Rods, increased ductility 51834-2001 410 265 12 Hardening and aging
Tape annealed 13726-97 235 10

Physical properties of the material

t°C E 10- 5 a 10 6 l r C R 10 9
Degree N/mm2 1/Gradus W/(m-degree) kg/m3 J/(kg-degree) Ohm-m
20 0.72 2770
100 22.9 130 0.922

sB - Ultimate short time strength

sT - limit of proportionality (yield strength for permanent deformation)

d5 - Tensile elongation at break.

HB - Brinell hardness

E - Modulus of elasticity of the first kind

C - specific heat capacity

Analogues

Inter Austria England EU Germany Italy USA France Czech Republic Switzerland
ISO ONORM BS EN DIN, WNr UNI AISI AFNOR CSN SNV
2024 AICuMg2 2024 ENAW-2024 3.1355 P-AlCu4.4MgMn AA2124 2024 424203 Al4Cu1.2Mg
ENAW-AlCu4Mg1 AlCuMg2 AA2024 A-U4G

Buy, bargain price

Supplier Evek GmbH offers dural round, bars, wire D16, price - determined by the technological features of production without the inclusion of additional costs. The company's website displays information on the latest arrivals of products. Buy dural round, bar, wire D16 today. In the segment of non-ferrous rolled products company Evek GmbH is a profitable supplier.