Wire, circle, aluminum bar B95 - 7075 - AlZnMgCu1.5

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
B95 7075 AlZnMgCu1.5 Delivery from the stock, in stock

Vendor

We offer to buy wire, rounds, bars B95, 7075, AlZnMgCu1.5 from the specialized warehouse of the supplier Evek GmbH with delivery in any city. You can order products with non-standard parameters. We have the best price-quality ratio for the whole range of products. Supplier Evek GmbH offers to buy wire, rounds, bars B95 or any similar brand, the price is optimal in this segment of rolled products.

Technical characteristics

Thanks to alloying, the alloy acquires additional hardness. Anodic oxidation is used to increase resistance to corrosion. Hardness HB 10 -1 = 125 MPa. Hardness after hardening and aging HB 10 -1 = 150 MPa. Supplier Evek GmbH offers to buy wire, rounds, bars B95, AlZnMgCu1.5, the best price in this segment of rolled products.

Percent composition (GOST 4784-97)

Fe Si Mn Cr Al Ti Mg Zn Cu Impurities
≤0,5 ≤0,5 0,2 - 0,6 0,1 - 0,25 86,2 - 91,5 ≤0,05 1,8 - 2,8 5 - 7 1,4 - 2 ≤0,1

Mechanical properties (temperature 20°C)

Range GOST s in sT d5 Heat treatment
- MPa MPa % -
Tubes 18482-79 490-510 375-400 5-7
Bar 21488-97 490-530 390-420 4-6 Quenched and artificially aged
Bar, high strength 51834-2001 550-570 480-490 6 Hardened and artificially aged
Annealed tape 13726-97 245 10
Profiles annealed 8617-81 275 10
Physical properties of the material
t°C E 10- 5 a 10 6 l r C R 10 9
Degree MPa 1/Gradus W/(m-degree) kg/m3 J/(kg-degree) Ohm-m
20 0.74 2850
100 23.2

sc - Ultimate short-term strength

sT - Limit of proportionality (yield strength for permanent deformation)

d5 - Tensile elongation at break.

HB - Brinell hardness

E - Modulus of elasticity of the first kind

C - specific heat capacity

Analogues

Inter Austria England Germany Italy USA France Czech Republic Switzerland Japan
ISO ONORM BS DIN, WNr UNI AISI AFNOR CSN SNV JIS
AlZn5.5MgCu AIZn6Mg2Cu1.5 7075 3.4365 AiZn5.8MgCuCr 7075 7075 424222 AlZnMgCu 7075
AlZn6MgCu AlZnMgCu1.5 L95 AlZnMgCu1.5 P-AlZn5.8MgCuCr A97075 A-Z5GU
L96 AA7075

Cold working

Plastic deformation, turning, milling, grinding, drilling.

Storage

Stored in covered or roofed warehouses, with adequate protection against mechanical and other types of damage.

Buy, bargain price.

Supplier Evek GmbH offers wire, rounds, bars B95, AlZnMgCu1.5, price - determined by the technological features of production without including additional costs. On the website of the company displays information on the latest arrivals of products. Buy wire, rounds, bars B95 or any similar brand today. In the segment of non-ferrous rolled steel, the company Evek GmbH is a profitable supplier. Timely delivery is ensured by representative offices in Eastern European cities.