Table - calculate the weight of sheet, strip, foil cobalt. The size and thickness of sheet, strip, foil cobalt.
Buy at factory price sheet of rolled cobalt sheet, strip, foil — offers company Electrocentury-steel. The supplier ensures the delivery of products at any address specified by the consumer.
Assortment of sheet metal from cobalt
Cobalt foil is made in the form of plates with dimensions 50x50 or 100x100 mm and a thickness of 0.1 mm. Brand and assortment for sheet/strip of cobalt correspond to GOST 123−2008. Cobalt and its alloys are produced in sheet and strip of a thickness of from 0.1 to 25mm and width from 50 to 600mm and in the chips 10*100*100 mm.
By agreement between manufacturer and consumer in the cobalt grade K0 is allowed the mass fraction of Nickel is not more than 0.05%; cobalt маркиК1А used for the manufacture of margantsovokislyj steels and alloys, is allowed the mass fraction of manganese is not more than 0.07%. By agreement with the consumer to determine the actual content of the additional, not regulated in a specific brand of impurities. The analysis is performed according to the techniques certified when due hereunder. |
Cobalt is manufactured in accordance with the requirements of this standard in the form of ingots, cathode sheets, plates or strips of arbitrary size, sliced from the cathode sheets. Maximum plate size is 550 x 550 mm minimum — 20 x 20 mm bar Weight should be no more than 25 kg.
The edges of the cathode sheets of cobalt needs to be cropped on all four sides. The lugs of the cathode sheets is cut along the edge of the cathode. By agreement with the consumer allowed to produce cathode cobalt leaves with untrimmed edges.
Buy sheet metal from cobalt, the company offers Electrocentury-steel. Supplier will deliver products to any place specified by the client.
Determination of the mass sheet, strip, foil
When calculating take into account the average density of cobalt, which is 8800 kg/m3. The calculation method is that for a given transverse size and thickness, and famous brand of cobalt it is possible to determine the mass M of a unit of production, using the formula
M = VxSxtxρ,
where: — width of sheet, plate or tape; S — length sheet, plate or strip; ρ — density of this grade bronze alloy.
The width of rolled sheet bronze alloys take according to the manufacturers.
The company Electrocentury-steel offers to buy a sheet, strip or foil made from cobalt. The supplier ensures delivery of products anywhere in. Specified by the customer.