Circle, bar 08x18n10t - 1.4541 - aisi 321

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
08X18H10T EI914 1.4541 321 X6CrNiTi18-10 Delivery from the stock, in stock

Technological properties

Steel of austenitic class 08Cr18Ni10, heat-resistant and corrosion-resistant. Forging temperature: beginning +1220°C, end +880°C. Parts up to 30 cm thick are cooled in the air in stacks. Welding method: РДС, АДС under flux and gas shielding, АDS, КТС and ESH. Final heat treatment is desirable. By its corrosion and heat resistance this steel is an analogue of 12X18N10T grade.

Usage

Serves for the manufacture of muffles and parts of furnace fixtures, pipes, nozzles, retorts, exhaust manifolds, spark plug electrodes, welded chemical equipment and large industrial containers for alkaline solutions and acids: nitric, phosphoric, acetic and their salts. Used very widely - from household goods to heat exchangers of nuclear boilers with water coolant.

Shape of delivery

Sheet, strip, round, wire, tubes. Sections, including shaped sections, are produced in accordance with the following GOSTs: 5949-75; 2590-88; 2591-88 and 2879-88. Tape - according to GOST 4986-79. Thick plate - GOST 7350-77. Thin plate - GOST 5582-75. Strip - GOST 4405-75 and 103-76. Forgings and forged blanks - GOST 1133-71 and 25 054-81. Tubes - GOST 9941-81 and 9940-81. Wire - GOST 18 143-72. Grinding and silver rod - GOST 14 955-77 and 18 907-73. Calibrated rod - GOST 7417-75; 8559-75 and GOST 8560-78.

Percent composition (GOST 5632-72)

С Si Mn Cr Ni Ti S P Cu
0,08 0,8 2,0 17,0-19,0 9,0-11,0 5.С-0.7 0,020 0,035 0,30

Heat resistance

Medium t ,°C Corrosion rate, mm/year Test base, h
Air 750 0,013 1000
Air +0,3% SO2 750 0.017 1000
Air+0.3% SO2+6%H20 750 0,038 1000
Air +1% SO2 750 0,022 1000
Air +5% SO2 750 0,11 1000

Corrosion resistance

Type of corrosion Medium t ,°C Duration, h Points of resistance
General 4 g/kg H3 BO3, 10 g/kg [NH3], 015 g/kg KOH PH=8-93m/sec) Water containing 5 mg/kg Cl, 0.3-6.0 mg/kg O2 40%HNO3 5-90% acetic acid 10-65% phosphoric acid 1-20% NaCl Saturated NaCl solution 320 250 350 20÷t boiling point 20÷ 75 20÷ 80 20÷ boiling point 3000 3272 3000 - - - - - 1 1 1 1 1 1 1 3
Spot According to corrosion properties it is close to 12x18n9t grade
Corrosion cracking
Intergranular Steel is not prone to IGC when tested according to GOST 6032-89 methods AM and AMU, after quenching and tempering at 650 °C 1h.

Mechanical properties

GOST Delivery condition Section, mm σ0.2 MPa σ in MPa δ5,% ψ,%
5949-75 Bar. Hardened from 1020-1100 °C in air, oil or water 60 196 540 40 55
18 907-73 Grinding bars, machined to the specified strength 1-30 - 590-830 20 -
7350-77, 5582-75 Hot- and cold-rolled sheets; quenched at 1000-1080°C in water or in air Quenched at 1050-1080°C in water or in air Sv. 4 Up to 3,9 206 - 509 520 43 40 _ -
25 054-81 Forging. Hardening from 1050-1100 °C in water or air Up to 1000 196 490 35 40
9940-81 Seamless hot-deformed pipe without heat treatment 3,5-32 - 510 40 -

Mechanical properties at elevated temperatures Mechanical properties in the long-term strength test

tisp ° C Creep strength, MPa Creep rate, %/h tisp °С Ultimate long-term strength, MPa τ, h
600 74 1/100 000 600 147 10 000
650 29-39 108 100 000
650 78-98 10 000

Buy, price

Evek GmbH sells high-quality stainless steel at an optimal price. It is formed taking into account the technological features of production and does not include additional costs. With us you can buy in bulk a variety of products for large-scale production. We also offer good conditions for retail buyers. The face of the company defines a high level of service and delivery in the shortest possible time. On our site you will find all the necessary information about the goods, you can download the catalog of products, view the price list. Our online consultant is always ready to answer your questions. We are waiting for your orders.