Circle, bar, VT-5 - titanium grade6

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
BT5 3.7115 R54520 Ti5Al2.5Sn Delivery from the stock, in stock
BT5-1 3.7115 R54520 Ti5Al2.5Sn Delivery from the stock, in stock

Characteristics

VT grade means "VIAM titanium". Titanium α-alloys BT5, BT5-1 (5Al-2,5Sn) are produced according to GOST 19 807-74 and OST 90 013-81. Heat resistance, corrosion and cryogenic resistance, plasticity, low sensitivity to cuts, good weldability allow to widely use semi-finished products of VT5, VT5-1 in machine-building, shipbuilding, aviation, rocket production, cryogenic and chemical industry.

Semifinished product Thickness (mm) Heat treatment Strength (MPa) Plasticity δ% KCU J/cm³
VT5-1 rod 10 - 60 Д Annealed 785 - 981 More than 10% Over 40
VT5-1 rod 140 - 250 П annealing 745 - 981 Over 6% Over 45
VT5-1 bar 140 - 250 Т Annealed 765 - 981 Over 8% Over 45
VT5-1 rod 5 - 100 Д Annealing 785 - 981 More than 10% Over 40%
VT5-1 rod 101 - 150 П annealing 745 - 981 Over 6% Over 45
VT5-1 rod 12 mm Annealed 843,3 - 926,7 11,94 - 14% 65,2 - 86
VT5-1 rod 18 mm 700° annealing 1 h 944 21% 60
VT5-1 rod 18 mm 1000-800° 1 h, air 891 12% ---
VT5-1 rod 18 mm 1100° 1 h, water 970° 1 h with furnace to 650°, air 902 12% ---
VT5-1 rod 14x14 mm annealed at 800° 777 13,8% ---

E - longitudinal direction of cut samples; P - transverse; H - height, T - tangential.

Long-term strength of BT5-1 bar in the annealed state

The long-term strength is the maximum stress that fractures the material at a given temperature, after a certain time. Naturally, the higher the temperature and longer the load duration, the lower the tensile strength.

Semi-finished product t°C Tensile strength (MPa)
Rods less than 100 mm 250° 588
588 bars less than 100 mm 300° 560
Bars less than 100 mm 400° 363-461
Bars less than 100 mm 500° 147-245

Fatigue resistance of VT5, VT5-1 bars

Bar Thickness (mm) Heat treatment Load diagram R Endurance limit (MPa) 10.000.000
VT5 20 Annealing --- - 1 Over 392
VT5 20 Annealing Symmetrical loading - 1 400 - 450
VT5-1 up to 100 mm Annealing Symmetrical loading - 1 490

Delivery

Presented titanium rolled products are certified. We supply a wide range of wire, rounds, bars of BT5, BT5-1 grade. The technical documentation includes data on chemical composition, marginal percentage of impurities, mechanical properties of products. From us you can buy in bulk any semi-finished products for large-scale production. We also offer optimum conditions for retail buyers. The high level of service and responsiveness of service is the face of our company.

Buy at a bargain price

The website of Evek GmbH reflects the most up-to-date information on purchasing titanium alloys to date. Experienced managers who are always in touch are ready to provide highly qualified consulting assistance on any current issues. We sell semi-finished products of rare and non-ferrous alloys at a competitive price. Products are manufactured on the most modern equipment and meet the requirements of international quality standards. Regular customers are offered a system of discount discounts.