Circle of nickel NP-2 - Nickel 200
International Equivalent
Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
---|---|---|---|---|---|
НП2 | 2.4060 | N02200 | Ni99.6 | Delivery from the stock, in stock | |
~2.4060 | N02233 | N02200 | Delivery from the stock, in stock |
dignity
Note heat resistance, heat resistance, high corrosion resistance to hot alkalis and acids concentrates. Mechanical strength to withstand the pressure 370−440 MPa products. At ordinary temperature in the air it is covered by a nickel oxide film, which protects the metal from corrosion. Ni and retains the magnetic properties at t ° -100 ° C. It is biologically maloaktiven, making it popular in the food industry, medicine. Its surface after polishing looks very impressive. Plasticity allows the NP-2 range of any section, to expose it to all kinds of processing: cutting, welding, turning, cold-rolled. sulfur impurity impairs the properties of the alloy NP-2, as tends to form a sulfide film on the surface that makes metal brittle at high temperatures.
Production
NP-2 range of 99.5% consists of pure Ni, 0.5% impurities, which include Cu, Si, Fe, Mn, SC Marking «N» means nickel itself, and «P» — semi-finished product. Reference numeral denotes a higher or lower content of impurities.
The chemical composition (Standard 492 — 2006)
Ni | C | Fe | Si | Mg | Cu | Mn | Zn | P | S | P | As, Bi, Sb, Pb, Sn |
---|---|---|---|---|---|---|---|---|---|---|---|
99.5. | ≤0,1 | ≤0,1 | ≤0,15 | ≤0,1 | 0.1 | 0.05 | ≤0,07 | ≤0,0,02 | ≤0,005 | ≤0,02 | 0.02 |
Known brand N-1, NP-1, NP-2 and others. For the manufacture of a circle using the brand H1, H3, NP-2, NP-3, Ni grade siliceous NC 0.2. NP-2 is produced by melting alloy nickel scrap. Manufacturing range normalizes GOST 083−77 13 «Rods of nickel and siliceous nickel». Under the terms of the order produced in any length. Its surface must be clean and smooth, free from dirt and cracks. The defects must not exceed the size of the tolerance. In place of the fracture circle should be no extraneous inclusions and voids. The edges of the cut should be smooth, chopped edges shall be permitted only in bars with Ø 35 mm. Tubes can only be straight. The value of the permissible curvature is determined by multiplying the length of the articles on the value of the largest curvature in a certain place.
The physical quality
A circle | GOST | s in | s in | curing |
---|---|---|---|---|
Solid | 13 083−77 | 540 | 5 | Without thermal treatment |
Soft | 13 083−77 | 370 | thirty | Without thermal treatment |
Hot | 13 083−77 | 440 | 10 | Without thermal treatment |
application
Production of parts that work in difficult conditions extreme heat and mechanical loads: special and Electro-mechanical engineering, instrument-making, chemical and petrochemical industry. The electrochemistry applied to the manufacture of cathodes and anodes; in metallurgy — for doping
Buy at the best price
The product range of the brand NP-2 by LLC «Electrovek-steel» will satisfy any customer. Price is determined by the technological features of production without including additional costs. All products are certified. We easily purchase wholesale products needed for large-scale projects, we also offer favorable conditions for retail customers. Technological equipment of each production stage gives us an opportunity to carry out individual orders of non-standard options. The products are manufactured in strict compliance with the requirements of the technological process that guarantees the highest quality, it is kept under cover or indoors to protect against mechanical damage, exposure to moisture and aggressive substances. Terms of realization of orders are minimal. Wholesale customers receive discounts.