The use of copper in electrical engineering
The company Electrovek-Steel produces a variety of copper products, semi-finished products and semi-finished products. Products are sold at affordable prices from manufacturers. The supplier guarantees timely delivery of rolled and blanks from copper to the address set by the customer.
Types of copper profiles used in electrical engineering
Due to the extremely low coefficient of its electrical resistance (only much more scarce silver is slightly superior in this parameter to copper), this metal is widely used in the manufacture of copper wires of power transformers and electric motors. Only copper of increased chemical purity is of practical importance, since the electrical conductivity of a given metal decreases with increasing percentage of any impurities.
Copper wires are obtained from the raw material in the form of a wire that undergoes multiple cold drawing with intermediate annealing, if required. As a result, products with a diameter of less than 0.15… 0, 5 mm are obtained. Such wire is widely used in telecommunication systems, in the manufacture of current-conducting contacts for spark ignition of engines, etc.
In contacts of various electrical devices — from rolling stock of rail and trackless vehicles to power current-conducting contacts of rectifiers — a thin sheet copper strip and tape is also used.
Buy copper billets of various assortment and sizes, which are used in electrical engineering, offers the company Electrovek-steel. Products are sold at economically advantageous prices of producers. The supplier ensures timely delivery of all ordered products to the point set by the consumer.
Advantages of using copper in electrical engineering
Economic feasibility of using copper profiles in the production of various electrical products is determined by the following:
- Sufficient mechanical strength of copper;
- The presence of elastic properties and the ability to work under different dynamic loads;
- The ease of mechanical, plastic and thermal processing;
- Economical consumption as a component of electric welding technology.
The company Electrovek-Steel offers to buy at a bargain price from the manufacturer a variety of copper blanks, semi-finished products or the original range used in electrical engineering. The ordered assortment of products is delivered by the supplier promptly, and precisely at the address indicated by the client.