St-07Kh25N13 - 1.4343a - er309L stainless welding wire
|Mark||Analogue||W. Nr.||Aisi Uns||En||Order|
|07Х25Н13||H-71||Delivery from the stock, in stock|
Welding wire grade Sv-07Kh25N13 (or Saint-07Kh25N13-e) is used for welding of the most important equipment of the rolling heat-resistant steels and castings: 20H23N18, 20H23N13 and similar, which are operated at temperatures up to 1000 ° C in oxidizing environments. It is possible to weld steel 25H25N20S2, 15H25T chromium steel and similar, as well as welding of low alloy and carbon steels with high alloyed austenitic steels. Welding equipment, consisting of a double layer of steel with a layer of doped steels and 12X18H10T 12X18H9T for surfacing intermediate layer and anti-corrosion coating of steel pearlitic on the details. Welding wire Sv-07Kh25N13 produced in accordance with GOST 2246−70, RD 03−613−03 and specifications 1220−005−84 823 540−2010. From it produce electrodes RLA-19, O3L-6, CL-9, 99-LEZ, ZIO-8 OZSH-6 EA-48M / 22, 8 OZSH-designed welding (welding).
The percentage of
|Not more than 0,25||Not more than 0,025||No more than 0,018||In fact||In fact||In fact||In fact|
|1.00−2.00||0,50−1,00||Not more than 0,09||23,00−26,00||Not more than 0,20||Not more than 0,25||12,00−14,00|
Mechanical properties of the wire Sv-07Kh25N13:
Tensile strength high-alloy and alloy wire in accordance with the rules.
|The diameter of the wire, mm||for the manufacture of electrodes||for welding (welding)|
|1.6||686−980 (70−100)||882−1274 (90−130)|
|St. 2.0||637−931 (65−95)||686−1029 (70−105)|
|2.0||686−980 (70−100)||784−1176 (80−120)|
Tolerances and wire diameters in accordance with the above:
|rated diameter||In the manufacture of electrodes||for welding (welding)|
|4.0; 5.0; 6.0||-0.12||-0.16|
The composition in the wire of the ferrite phase is regulated only by agreement of the parties.
The chemical properties of the weld metal:
Position for welding:
H1, 2, P1, 2, H45, B1, T
Good quality form filling, and root weld cladding layers, stable arcing. Weld metal welding wire used in conjunction with melted welding flux (type AN-26C or its analogs) and argon (inert gas).
Mechanical properties of weld metal (the test in the submerged arc welding)
|Brand welding wire||Elongation in%||Yield in σ T, MPa||Tensile strength σ B, in MPa||Toughness in KCU J / cm2|
|CB-07Kh25N13, CB-07Kh25N13-e||34||408.3||608.4||127.1 -143.5|
The diameter of the wire 1; 1.2; 1.6; 2.0; 2.5; 3, 4 and 5 mm (may be the production of other diameters on request). Packing: Coils 80−100 kg, the metal skeleton coil K300, K415, plastic coil D200, D300. All presented products are certified. The technical documentation includes data on the chemical composition, limiting the percentage of impurities; mechanical properties of products. We can buy in bulk, any semi-finished products for large-scale productions. We also offer optimal conditions for retail customers. High level of service and efficiency of service are the face of our company.
Buy at the best price
The site of LLC «Electrovek-steel» reflects the most current information on the acquisition of the welding wire to date. Experienced managers who are always in touch, ready to provide highly qualified advice on any current issues. We sell semi-finished non-ferrous and rare at a competitive price. Products manufactured at the most modern equipment and meets the requirements of Russian State Standard of quality and international quality standards. Regular customers receive a discount system of discounts.