Gas cutting of metal
Electrovek-Steel Company sells state-of-the-art technological installations for high-performance gas cutting of metals and alloys at an affordable price. The supplier ensures the timely delivery of products to the point that is appointed by the consumer.
Gas cutting technology
To separate the metal by a gas stream, a working mixture consisting of two components is necessary: a gas that heats the separation zone, providing local melting of the material of the preform, and a gas compressing the main stream and simultaneously heating it to the necessary temperatures. The first task is performed by oxygen, when burning, sufficient heat is generated for the melting of the metal. As the gas heating the oxygen, most often take propane or acetylene.
The gas cutting process is used with repair and small-scale production, since it does not require significant capital investments, a complex working tool and scarce consumables. It consists of the following, successively performed stages:
- Fixing the workpiece on the coordinate table in accordance with the required configuration of the cutting surface;
- Supply of heating gas to the desired area of the metal surface with a gradual heating thereof;
- The oxygen supply, which is activated automatically, upon receipt of a control signal from the temperature sensor;
- Moving the working head with a torch along the line of separation, until the end of the process.
- Feed disconnections: first — oxygen, and then heating gas.
To buy modern technological equipment for performing gas cutting of metals and alloys at a bargain price from the manufacturer offers the company Elektrovek-steel. The supplier provides prompt delivery of products to the address specified by the customer.
For gas cutting, both stationary and mobile equipment can be used. It includes gas-oxygen cutters (in stationary installations there can be several), a set of replaceable nozzles, gas-supplying hoses and containers (or cylinders) with gases. All plant designs are designed to work with sheet metal.
In modern designs of stationary type, an active tracking system is implemented, which constantly monitors the direction of movement of the working head with cutters, as well as the flow and pressure of the working gases. This ensures high quality and productivity of the process.
Electrovek-steel company offers to purchase modern equipment for gas cutting of metals and alloys at economically favorable prices. The supplier guarantees timely delivery of the equipment to the point set by the customer.